INSTRUCTIONS: Construction And Fabricated Of A Mobile Deep Freezer project material. Please, sit back and study the below research material carefully. DO NOT copy word for word. CareersHelp aim of providing this Construction And Fabricated Of A Mobile Deep Freezer project research material is to reduce the stress of moving from one school library to another all in the name of searching for Construction And Fabricated Of A Mobile Deep Freezer research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works. According to Austin Kleon "All creative work builds on what came before"
You are reading project material titled: Construction And Fabricated Of A Mobile Deep Freezer
2.0 Literature Review
3.0 Design Analysis And Calculations
3.1 Determination And Choice Of Condenser And Evaporator Temperature.
3.2 Cooling Load Calculation
3.3 Flow Rate
3.3.1 Mass Flow Rate
3.3.2 Ton Of Refrigeration
3.3.3 Volume Flow Rate
3.4 Determination Of Compressor Size
3.5 Determination Of Pipe Size And Length
3.5.1 Comparing The Velocities For Different Pipe Size.
3.5.2 Summary Table.
4.0 Construction Details
4.1 Material Selection
4.2 Sequence Of Operation
5.0 Cost Analysis
6.1 Maintenance And Use Instructions
6.1.1 Condenser Maintenance
6.1.3 Other Instructions
6.1.4 Common Complaints, Causes And Remedy
7.1 Requirements For Refrigerants
7.2 Identifying Refrigerants By Number
7.3 Halide Refrigerants
7.4 Grouping And Classification Of Refrigerants
7.5 Group One Refrigerants
7.6 R-12 Dichlorodi Fluoromethane (Ccl2f2)
7.7 R-22 Monochlorodi Fluoromethane (Chclf2)
7.8 R-11 Trichloromono Fluoromethane (Ccl3f)
7.9 Azeotropic Mixtures
7.10 R-500 Refrigerant
7.11 R-502 Refrigerant (R-22 + R-115) (Chclf2/Cclf2 Cf3)
7.12 R-503 Refrigerant (R-23 +R-13) (Chf3/Cclf3).
7.13 R-504 Refrigerant (R-32 +R115) (Ch2f2 (F3 Cclf2)
7.14 Group Two Refrigerants
7.15 R- 717 Ammonia (Nh3)
7.16 Group Three Refrigerants
7.17 Expendable Refrigerants
7.18 Water As A Refrigerants
7.19 Refrigerant Cylinders
7.20 Color Code For Refrigerants Cylinders
The main objective of this project is to construct and fabricate a deep freezer. The purpose of a deep freezer is to extract as mush heat from the cold body as possible with the expenditure of as little work as possible. In the refrigeration cycle, a substance called the refrigerant is compressed, cooled and then expanded. In expanding the refrigerant absorbs heat its surrounding (the cooling compartment) to provide refrigeration. After the refrigerant absorbs heat from the source, the cycle is repeated.
The second chapter of these write-up ushers in a precise review of the history and literature of refrigeration from ancient man to modern day or contemporary man (i.e modern refrigerating equipment).
Chapter three deals in detail on the methods of calculating refrigeration equipment. Chapter four sequentially gives the overview of the factors, qualities and properties considered in choice decision of the material components (both standard/ranging engineering materials) used for the fabrication and the steps undergone in the assembly of the components to form the refrigerating equipment.
The fifth chapter analysis the material and labour cost incurred in the course of undertaking this project. Chapter six, summmarily is a low down of the maintenance and use instructions to be strictly adhered to in order to make the most effective, economic and efficient use of the refrigerating equipment as well as enable the equipment complete its service life. There is also a provision in this part for the notification of the usual defects observed or experienced during use and the corresponding panacea for them. Included is the reference for future consultancy which helps the student or reader who decides to embark on further research or a fact finding mission on innovations that may add as a filling to this work or to the topic as a whole.
This write-up within its scope is moderate sufficient to the educate the reader on the design and fabrication of a deep freezer.