INSTRUCTIONS: Construction Of A Screw Conveyor With A Single Phase Electric Motor project material. Please, sit back and study the below research material carefully. DO NOT copy word for word. CareersHelp aim of providing this Construction Of A Screw Conveyor With A Single Phase Electric Motor project research material is to reduce the stress of moving from one school library to another all in the name of searching for Construction Of A Screw Conveyor With A Single Phase Electric Motor research materials. We are not encouraging any form of plagiarism. This service is legal because, all institutions permit their students to read previous projects, books, articles or papers while developing their own works. According to Austin Kleon "All creative work builds on what came before"
You are reading project material titled: Construction Of A Screw Conveyor With A Single Phase Electric Motor
Little Of Transmittal
Table Of Content
1.2 Description Of The Screw Conveyor
2.1 Mode Of Operation
2.2 Material Selections
3.2 Design Analysis
3.3 Principle Of Operation
3.4 Capacity Of The Screw Conveyor
3.5 Sequence Of Operation/ Construction
4.1 Assembling Of The Conveyor
4.2 Cost Analysis
This is any of various devices that provide mechanized movement of materials as in a factory; they are used principally in industrial applications but also on large forms in warehousing and freight handling, and in movement of law materials. They may be only a few meters in length or they may be in regretted systems several miles along.
Also, it could said to be a family of materials handling machine designed to move individual articles of solid.
Free flowing bulk materials over a fixed horizontal, inclined, declined or vertical path of travel with continuous motion.
This is a conveyor consisting of a helical screw that rotates upon a single shaft within a stationary tough or casing, and which can move bulk material along a horizontal, inclined or vertical plane. It is also known as AUGER CONVEYOR, SPIRAL CONVEYOR. AND WORM CONVEYOR.
The idea to build this project dawned on us during our practical on the course January technology. We (the students) in ought in sand for a mould practical which was screened by the lecturer and the appropriate ones selected for the practical to be carried out.
This project is necessary because it will did the lecturer in his lesson as well as stop the stress being put on students to go out and dig up sand for the practical.
The need for this project is to convey sand lactated in a strong facility through the conveyor to the point of use. These builds up on eagerness or learn in the students with the project being a point of interest.
Screw conveyors consist of revolving shafts with a continuous or broken spiral fighting that operates insides a casing. This is powered by an electric motor and suitable gearing, the screw conveyor usually operates in one direction only to move fine bulk material such as meal, seed, coal, etc from one point to another point.